Maintenance Support
Q: How do I clean the inside of my Unit?
A: The interior can be cleaned with a non-abrasive cleaner. Do not use “brilo” or “sos” type abrasive pads, as they will score the surfaces. Baking soda is recommended.
Q: How can I clean my stainless steel door panel?
A: One of the easiest ways to remove marks or smudges on the stainless steel panel and door trim is with a little WD40 spray lubricant or Silicone lubricant spray (for a non-scented version). Spray a little on a clean cloth and wipe the panel or door trim. Take a clean cloth and follow up the initial cleaning to dry the stainless off. The residue of the WD40 or Silicone Lubricant should evaporate off and leave a clean, streak free refrigerator panel or trim.
Q: How do I change the door gasket?
A: To change your door gasket, click this link, to follow a diagrammed work flow on how to do this.
Q: How do I remove the crisper shelf?
A: Please see our step-by-step support video on removing the crisper shelf.
Q: What can i do if I have a crack in my cabinet liner?
A: If an object such as a can drops and causes a small indent or crack this can be repaired using standard plastic model cement to seal it. A small amount only is needed. Using model cement causes a reaction with the plastic so please allow time for this to completely dry.
The cabinets and doors of all Nova Kool units are foamed with urethane foam insulation. The foam is closed cell foam and is up against the plastic styrene liner of the refrigerator.
Q: What can I do if I have a bulge in my door liner?
A: Very rarely a door bulge can occur after the unit has been subjected to very hot environments and the foam gives off a little pressure. Click this link to see a work flow on how to repair this.
Q: How do I change my light to an LED on an older model fridge?
A: On fridge models that were made prior to 2014, you may wish to order an LED light and change the light source in the fridge. Please click this link for a work flow on how to do this. Click here for the light assembly template.