All LT units and plates come pre-charged with ozone friendly refrigerant and are temperature controlled with an automatic thermostat. These units are very rugged and versatile. All LT units can run on an angle up to 30° with no capacity loss. Great for freezers, refrigerators and fridge, freezer box combinations.
The LT201 series of units and plates are designed with ease of installation built into each component. The refrigeration kits are simple by design, with less moving parts than most other refrigeration systems. Pick a cooling plate kit to fit your application and add the compressorized cooling unit to complete the installation. All kits include a thermostat, and pre-charged refrigeration lines, plus an assortment of mounting hardware. Just add power and let the cooling begin.
Every unit comes with an ice cube tray (with lid), an user manual, mounting hardware, easy to use reusable couplings, an automatic thermostat, an over-sized air cooled condenser, and red (high speed) and black (med speed) resistor as well as a line kit (comes standard at 12 feet with optional increase in length up to 18ft available)
Conversion Unit Options
F Evaporator with LT201
The F Plate Kit is available in 1, 2 or our most efficient, 3 plate design.
16in (406mm) x 10in (254mm). Plates can be separated up to 18in (457mm) apart.
F1 Evaporator with LT201
The F1 Evaporator plate is a single plate that conveniently fits into smaller spaces. Pair with an LT201 compressor.
RT4 Freezer Box Evaporator with LT201
The RT4 is a customizable freezer box.
10.5 (267mm) Wide x 11.5 (279) deep x 6.5 (165mm) high freezer box plate.
RT6 Freezer Kit with LT201
The RT6 Freezer Box may be mounted vertical or horizontal. Internal volume .54 cu.ft. (15.3 liters)14 (356mm) long x 6.75 (172mm) high x 11 (279mm) deep
FL & FM Evaporator Kit with LT201
These two long plates are designed so you can bend them to fit your application.
FL Dimensions: 36 (914mm) x 15 (381mm)
FM Dimension: 32 (813mm) x 11.5 (292mm)